ACF 50

http://www.learchem.com/products/acf-50.html

Tegsy back from the dead :)

Tegsy has a fresh MOT after a couple of years resting up... New parts include :- Starter motor Battery Exhaust Mounts Rear suspension mounts Fuel Pipe Wipers Brand new rear Shocks Four wheel alignment New track rod ends Fuel system flush Back with a vengeance!! running well handling like a dream :)

Final Removals Before Sandblast?

 Started by cutting away the outer lower valance to highlight the state of the inner.

 Bothe lower posts and valance corners are gone.

 These are the reinforced chassis mounting points, both look the same.

 So off with the lower front clip and lower A posts.

 I have discovered what is either an original left over piece of the front clip (there is crash damage to inner cab floor) or a dodgy patch plate....wobbly at the edges but secured in the center?? Was there a plate that sits on the front of the inner valance that drops down to sandwich in between the outer upper and lower panels? Cause that's how it was at removal.

 Detail showing the last bits of the inner lower valance and this strange section from the underside looking forward..

 Not so much left now but at last some shiny steel of the chassis front edge. Repare panels from Autocraft come with new chassis brackets.

 Looking up into the A posts.....still need to be cut back to the cab floor,.

Entropeas great pile of junk!!!!  But I am now thinking about the rear cargo floor!!!!
P.s. VW heritages ebay store has some split side panels that have dents that could be purfect!!

Outer and inner front wheel arch repair

Big shout out to OCD1 for his decisive grinder skills!

VW Split Screen Front Wheel Arch Removal

A lot of  progress here some serious cutting going on with both front wheel arches out revealing some serious

internal rebuilding required. Side sills being unpicked and inner sills and pretty good but are rusted out in places. Inner door plate on the cargo sill is shot.

 A post isn't there.

 A post also shot.

Offside and nearside front wheel arch removal

Another wheel arch unpicked and side outer sill started. Inner sill looks good although the outrigger and the bottom of the b-pillar not looking great. Hey Ho now for further investigation on the front inner valance and more rust removal.

Before and After

A collection of photos for my Type 2 comparing pre and post resto.

Its worth all the effort.............in / for the long run!!